CRAYMUL 8472
GRAPHIC ARTS TECHNICAL DATA SHEET
SOLID STYRENE ACRYLIC RESIN
· Glycol Ether Free · Extremely High Pigment Grinding Efficiency · High Holdout &
High Transfer · Easy Solubilization · Medium Molecular Weight · Excellent
Printability
HIGH GLOSS PIGMENT GRINDING RESIN / OPV EXTENDING RESIN
TYPICAL PROPERTIES*
% Solids
>99.0
Molecular Weight
5800
Softening Point (°C)
150
Acid Number
220
Co-solvent
None
Tg(°C)
103
* Not to be considered as product specifications
Suggested Uses
· Extremely High Strength Pigment Dispersions
· High Gloss Inks and OPV’s
· Resoluble Inks and Coatings
REPLACES: NONE
CRAYMULÔ 8472
Solution Preparation:
To prepare 33% solids solution of CRAYMUL 8472 in ammonia and water, the following procedure should be followed:
Ingredient
% By Weight
Water (55°C / 130°F)
59.1
CRAYMUL 8472 Resin
33.0
Charge water & resin and, under agitation, add ammonia. Maintain
agitation until all the resin has dissolved.
Ammonia (28 Baumé)
7.9
TOTAL
100.0
Typical Properties:
Viscosity
2500 cps
% Solids
33.0
pH
8.5
FDA Status:
CRAYMUL 8472 contains ingredients which comply with the following indirect food additives sections of 21 CFR
21 CFR Title Status
175.105 Adhesives Permitted for use without restriction.
175.300 Resinous and polymer coatings For use only in contact with food types IV-A, V, VII (Table 1)
under use conditions E through G (Table 2) in section 175.300. It
may be used with food type VIII without use restrictions.
175.320 Resinous and polymer coatings for
polyolefin films
For use only in contact with food types IV-A, V, and VII (Table 1)
under use conditions E through G (Table 2) in section 176.170. It
may be used with food types VIII and IX (Table 1) without use
restrictions.
176.170 Components of paper and paperboard in
contact with aqueous and fatty foods
For use only in contact with food types IV-A, V, and VII (Table 1)
under use conditions E through G (Table 2) in section 176.170. It
may be used with food types VIII and IX (Table 1) without use
restrictions.
176.180 Components of paper and paperboard in
contact with dry foods
Permitted for use without restriction.
REPLACES: NONE
CRAYMULÔ 8472
WARRANTY, DISCLAIMER, AND LIMITATION OF LIABILITY
(Rev. 12/02, supersedes 06/01)
Seller warrants to Buyer that, at the time of shipment, the products sold hereunder shall meet Seller’s then-applicable specifications for such product. Seller’s
specifications may be changed at any time without notice to Buyer. To assert a warranty claim, Buyer must give Seller notice in writing of the alleged failure of
the product to conform to the applicable specifications (together with all identifying details, including the product code(s), description and date of purchase)
within thirty (30) days of the date of shipment of the product to Buyer and, upon Seller’s request, shall return the alleged nonconforming product. The failure of
Buyer to assert a claim within such period shall be an admission by Buyer and conclusive proof that such product is in every respect as warranted and shall
release Seller from all claims for damage or loss in respect of such product. THE WARRANTY DESCRIBED HEREIN SHALL BE IN LIEU OF ANY OTHER
WARRANTY, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. Without limiting the
generality of the foregoing, the warranty provided above does not extend to damage, loss, or injuries caused by or in any way related to misuse,
misapplication, abuse, improper handling or storage of the product; normal weathering (including but not limited to cracking and blistering); or any cause
beyond the control of Seller. Seller further disclaims any and all liability for Buyer’s decision to modify, amend or reject any recommendation set forth herein.
Seller does not warranty or guarantee that implementation of any of the recommendations set forth herein constitute compliance with any federal, state or
local laws or regulations. Final determination of the suitability of the product for the use contemplated, the manner of use, and whether the use infringes any
patents is the sole responsibility of Buyer.
Buyer’s sole