ENCOR™ 9801

Pressure sensitive acrylic emulsion designed for packing tape applications

制作包装胶带用压敏胶的水性丙烯酸乳液

Product Benefits 

ENCOR 9801 is an inherently pressure-sensitive acrylic emulsion that has an excellent balance of peel and cohesive strength on a wide variety of surfaces.

产品优点

ENCOR 9801是一只亚敏胶用的丙烯酸乳液，在多种材质表面具有很好的可重复剥离性能。

Polymer Design  • 100% Acrylic polymer

产品结构  100%的纯丙烯酸树脂

Performance

Benefits

• Excellent clarity and water whiteness

• Excellent balance of peel, tack and cohesive strength

• Adhesion to low surface energy materials

• Excellent flow and leveling

• High line speed capability

• Conformance to FDA 21CFR175.105

产品特点：

很好的透明性和耐水白性

极好的可重复剥离性能

对低表面能地材质也具有很好的附着牢度

很好的流动性与流平性

可高速施工

符合FDA 21CFR175.105条款

Typical Polymer产品参数

Properties1

Total Solids, % by weight 55

固含

Weight per Gallon, lbs

比重8.65

pH Value(PH值) 8.5

Particle Size, µm 

粒径0.3

Viscosity Brookfield, cP*

粘度250 max. Glass Transition Temperature, °C 

玻璃化温度 -42

VOC Potential, g/L 

残留VOC                                                                                                    <5< p="">

Typical Adhesive

粘合牢度参数

Properties1

180º Peel, 30 min dwell on stainless steel l, pli 3.0

附着在不锈钢表面30分钟后，180度剥离角度，（磅/每英寸）3.0

Loop Tack on stainless steel, psi 1.0 min.

循环贴在不锈钢表面

Shear Resistance, hours, on stainless steel, (1”x 1” x 1000 g) 24 min.

面积1平方英寸X1平方英寸粘贴在不锈钢表面，1KG的剥离力，剥离时间 24分钟

*Brookfield LVT, No. 2 spindle at 60 rpm

Tested on 2-mil PET backing at a coat weight of 1.6 – 1.8 g/100 in2 , 73º F, 55% RH

1The data provided for these properties are typical values, intended only as guides, and should not be construed as sales specifications.

ENCOR™ 9801

Pressure sensitive acrylic emulsion designed for packing tape applications

Product

产品安全性

Safety

Before handling the materials listed in this bulletin, read and understand the

product MSDS (Material Safety Data Sheet) for additional information on personal protective equipment and for safety, health and environmental information. For environmental, safety and toxicological information, contact our Customer Service Department at 1-866-837-5532 to find an MSDS, or visit our web site: http://www.arkemacoatingresins.com/.arkemacoatingresins.com

在使用该产品前清仔细阅读MSDS文件，必要时可拨打我们的客户服务部门电话或浏览我们的网页。

No chemical should be used as or in a food, drug, medical device, or cosmetic,

or in a product or process in which it may contact a food, drug, medical device, or

cosmetic until the user has determined the suitability and legality of the use. Since government regulations and use conditions are subject to change, it is the user’s responsibility to determine that this information is appropriate and suitable under current, applicable laws and regulations.

任何化学物品不能作为食物，药物，医疗物品或与这些物品接触，而且必须遵守当地国家或政府的法律，法规 。

Arkema Coating Resins requests that the customer read, understand,

and comply with the information contained in this publication and the current

MSDS(s). The customer should furnish the information in this publication to its employees, contractors, and customers, or any other users of the product(s), and request that they do the same.

阿科玛要求客户认真阅读并遵守产品中的MSDS的所有要求，而且要求他们的员工也同样遵守。

Storage and

储存

Handling

Follow procedures typically recommended for polymer dispersions. Use corrosion-

resistant storage tanks and piping. Air-operated diaphragm pumps are preferred. Avoid temperature extremes. Do not freeze; store between 4-40°C.

使用防锈的储罐，通风4-40度保存，避免高温和冷冻，